65-45-2 structure, C7H7NO2
salicylamide
CAS No.: 65-45-2 Formula: C7H7NO2 Molecular Weight: 137.13600
Search Suppliers

salicylamide

CAS No.:

65-45-2

Formula:

C7H7NO2

Molecular Weight: 137.13600
Suppliers: All (188) China Suppliers (120) Price Available (29) Contractor (10)

Description

Salicylamide (o-hydroxybenzamide or amide of salicyl) is a non-prescription drug with analgesic and antipyretic properties. Its medicinal uses are similar to those of aspirin. Salicylamide is used in combination with both aspirin and caffeine in the over-the-counter pain remedy "PainAid". It was also an ingredient in the over-the-counter pain remedy BC Powder but was removed from the formulation in 2009. It was used in later formulations of Vincent's powders in Australia as a substitute for phenacetin.

Numbering system

MDL number MFCD00007978

Properties

Appearance & Physical State

white to pink crystalline powder

Density

1.175 g/cm3

Boiling Point

270ºC

Melting Point

139-142ºC

Flash Point

181°C/14mm

Refractive Index

1.562 (20ºC)

Stability

Stable. Light sensitive. Incompatible with strong bases, strong oxidizing agents.

Storage Condition

Store at 2 - 8ºC. Keep container tightly closed.

Safety Info

RTECS

VN6475000

Hazard Class

6.1(b)

Safety Statements

26-36

HS Code

2924299090

WGK Germany

3

Packing Group

III

RIDADR

UN 3249

Risk Statements

R22

Hazard Codes

Xn

Caution Statement

P261; P305 + P351 + P338

Hazard Declaration

H302; H315; H319; H335

Symbol

GHS07

Signal Word

Warning

SDS 1.0

Expand

SDS 1.0

Collapse
Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name salicylamide

1.2 Other means of identification

Product number -
Other names Benzamide, 2-hydroxy-

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

Company MOLBASE (Shanghai) Biotechnology Co., Ltd.
Address Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road,
Xuhui District, Shanghai, China
Telephone +86(21)64956998
Fax +86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-400-6021-666
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Acute toxicity - Oral, Category 4

Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Warning

Hazard statement(s)

H302 Harmful if swallowed

H411 Toxic to aquatic life with long lasting effects

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P273 Avoid release to the environment.

Response

P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/…if you feel unwell.

P330 Rinse mouth.

P391 Collect spillage.

Storage

none

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
salicylamide salicylamide 65-45-2 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms/effects, acute and delayed

SYMPTOMS: Symptoms of exposure to this compound include dizziness, drowsiness, nausea, vomiting, epigastric distress, allergic reactions and blood dyscrasias. It can cause central nervous depression, hypotension and respiratory arrest. This compound may greatly potentiate the hepatic toxicity of acetaminophen. It may also cause hyperpnea, renal failure, prolonged bleeding time, a mild burning pain in the mouth, throat and abdomen, lethargy, tinnitus hearing loss, excitability, delirium, fever, sweating, dehydration, incoordination, restlessness, ecchymoses, coma, convulsions, cyanosis, oliguria, uremia, pulmonary edema, gastric ulcer, weight loss and mental deterioration. Other symptoms may include skin eruptions, headache, difficulty in hearing, dimness of vision, lassitude and hyperventilation. ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes of carbon monoxide, carbon dioxide and nitrogen oxides.

4.3 Indication of immediate medical attention and special treatment needed, if necessary

Minimum/Potential Fatal Human Dose

3. 3= MODERATELY TOXIC: PROBABLE ORAL LETHAL DOSE (HUMAN) 0.5-5 G/KG, BETWEEN 1 OUNCE AND 1 PINT (OR 1 LB) FOR 70 KG PERSON (150 LB).

Absorption, Distribution and Excretion

WHEN...GIVEN ORALLY...IT IS ABSORBED AND EXCRETED SO RAPIDLY THAT HIGH PLASMA LEVELS ARE NOT OBTAINED. IT DIFFUSES QUICKLY INTO THE VARIOUS BODY TISSUES AND INTO A MUCH GREATER APPARENT VOLUME OF BODY WATER... ANIMAL STUDIES SHOW...DIFFUSION RAPIDLY INTO THE BRAIN.

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used.

5.2 Specific hazards arising from the chemical

Flash point data for this chemical are not available; however, it is probably combustible.

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Salicylamide preparations generally should be stored in well-closed containers at a temperature less than 40°C, preferably between 15 and 30°C.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state white to pink crystalline powder
Colour WHITE OR SLIGHTLY PINK CRYSTALLINE POWDER
Odour no data available
Melting point/ freezing point 300°C(dec.)(lit.)
Boiling point or initial boiling point and boiling range 182°C/14mmHg(lit.)
Flammability no data available
Lower and upper explosion limit / flammability limit no data available
Flash point 80°C(lit.)
Auto-ignition temperature no data available
Decomposition temperature no data available
pH ABOUT 5 @ 28 DEG C (AQ SOLN)
Kinematic viscosity no data available
Solubility less than 1 mg/mL at 20°C
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure no data available
Density and/or relative density 1.175 g/cm3
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

DEVELOPS SLIGHT PINK COLOR ON EXPOSURE TO LIGHT, THEREFORE STORE IN LIGHT RESISTANT CONTAINERS

10.3 Possibility of hazardous reactions

2-HYDROXYBENZAMIDE is an amide. Amides/imides react with azo and diazo compounds to generate toxic gases. Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx). This chemical may be sensitive to prolonged exposure to light.

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

DANGEROUS; WHEN HEATED TO DECOMPOSITION, IT EMITS HIGHLY TOXIC FUMES OF /NITROGEN OXIDES/.

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

An estimated BCF value of 5.5 was calculated for salicylamide(SRC), using an experimental log Kow of 1.28(1) and a recommended regression-derived equation(2). According to a recommended classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms will not be an important fate process(SRC).

12.4 Mobility in soil

The Koc of salicylamide is estimated as approximately 118(SRC), using an experimental log Kow of 1.28(1) and a regression-derived equation(2,SRC). According to a recommended classification scheme(3), this estimated Koc value suggests that salicylamide has high mobility in soil(SRC).

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.2 UN Proper Shipping Name

ADR/RID: unknown
IMDG: unknown
IATA: unknown

14.3 Transport hazard class(es)

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.4 Packing group, if applicable

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.5 Environmental hazards

ADR/RID: yes IMDG: yes IATA: yes

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
salicylamide salicylamide 65-45-2 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Not Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

MSDS

Expand
Predict 1H proton NMRExpand

NMR Spectrum Predict 1H proton NMR

Collapse
65-45-2 NMR spectrum
More

GC Analysis

Total 19 Documents >>
Column type Active phase Temperature (°C) Retention Index (I) Temperature Control Method
Capillary BP-1 130. 1402. isothermal
Capillary DB-1 130. 1397. isothermal
Capillary BP-1 130. 1422. isothermal
Packed OV-1 200. 1450. isothermal
Packed OV-101 200. 1445. isothermal
Recommended Suppliers
More Suppliers>>
Other items you might be interested in
Category in MOLBASE