1.Identification
1.1 GHS Product identifier
Product name | N4-(6-chloro-2-methoxyacridin-9-yl)-N1,N1-diethylpentane-1,4-diamine hydrochloride |
---|
1.2 Other means of identification
Product number | - |
---|---|
Other names | (+)-N4,N4-diethyl-N1-(6-chloro-2-methoxy-acridin-9-yl)-1-methyl-butanediyldiamine,dihydrochloride |
1.3 Recommended use of the chemical and restrictions on use
Identified uses | For industry use only. |
---|---|
Uses advised against | no data available |
1.4 Supplier's details
Company | MOLBASE (Shanghai) Biotechnology Co., Ltd. |
---|---|
Address | Floor 4 & 5, Building 12, No. 1001 North Qinzhou Road, Xuhui District, Shanghai, China |
Telephone | +86(21)64956998 |
Fax | +86(21)54365166 |
1.5 Emergency phone number
Emergency phone number | +86-400-6021-666 |
---|---|
Service hours | Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours). |
2.Hazard identification
2.1 Classification of the substance or mixture
no data available
2.2 GHS label elements, including precautionary statements
Pictogram(s) | no data available |
---|---|
Signal word | no data available |
Hazard statement(s) | no data available |
Precautionary statement(s) | |
Prevention | no data available |
Response | no data available |
Storage | no data available |
Disposal | no data available |
2.3 Other hazards which do not result in classification
no data available
3.Composition/information on ingredients
3.1 Substances
Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
---|---|---|---|---|
N4-(6-chloro-2-methoxyacridin-9-yl)-N1,N1-diethylpentane-1,4-diamine hydrochloride | N4-(6-chloro-2-methoxyacridin-9-yl)-N1,N1-diethylpentane-1,4-diamine hydrochloride | 130-42-7 | none | 100% |
4.First-aid measures
4.1 Description of necessary first-aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms/effects, acute and delayed
SYMPTOMS: Symptoms of exposure to this compound include discoloration of the skin, sclera and urine, exfoliative dermatitis, acute hepatic necrosis, agranulocytosis, aplastic anemia, corneal edema and psychosis. ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits very toxic fumes.
4.3 Indication of immediate medical attention and special treatment needed, if necessary
For treatment of overdose: Recommended treatment consists of the following: Evacuating the stomach by gastric lavage ... Controlling seizures with benzodiazepines or ultrashort-acting barbiturates. Treating shock by administration of fluids and vasopressors ... Supporting respiration. Administer supportive measure such as maintaining an open airway, breathing and circulation. Closely observing for at least 6 hours those patients who have survived the acute phase and are asymptomatic.
5.Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
5.2 Specific hazards arising from the chemical
Flash point data for this chemical are not available, but it is probably combustible.
5.3 Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
6.Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7.Handling and storage
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store below 40°C (104 deg F), preferably between 15 and 30°C (59 and 86 deg F) in a light-resistant container, unless otherwise specified by manufacturer. Store in a tight container.
8.Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure limit values
no data available
Biological limit values
no data available
8.2 Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Respiratory protection
Wear dust mask when handling large quantities.
Thermal hazards
no data available
9.Physical and chemical properties
Physical state | PHYSICAL DESCRIPTION: Bright yellowish needles or bright yellow powder. Odorless. pH of a 1% aqueous solution is about 4.5.. Used as an anti-malarial drug. Moderately toxic. |
---|---|
Colour | Bright yellow crystals |
Odour | no data available |
Melting point/ freezing point | 248ºC |
Boiling point or initial boiling point and boiling range | 557.1ºC at 760mmHg |
Flammability | no data available |
Lower and upper explosion limit / flammability limit | no data available |
Flash point | 290.7ºC |
Auto-ignition temperature | no data available |
Decomposition temperature | no data available |
pH | no data available |
Kinematic viscosity | no data available |
Solubility | 10 to 50 mg/mL at 17.78°C |
Partition coefficient n-octanol/water (log value) | log Kow = 5.75 at 25°C (est) |
Vapour pressure | 1.9E-12mmHg at 25°C |
Density and/or relative density | 1.156g/cm3 |
Relative vapour density | no data available |
Particle characteristics | no data available |
10.Stability and reactivity
10.1 Reactivity
no data available
10.2 Chemical stability
Sensitive to light. /Quinacrine hydrochloride/
10.3 Possibility of hazardous reactions
QUINACRINE DIHYDROCHLORIDE is an acidic salt of an amine. React as a weak acid to neutralize bases.
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
no data available
10.6 Hazardous decomposition products
no data available
11.Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
12.Ecological information
12.1 Toxicity
- Toxicity to fish: LC50 Lepomis macrochirus (Bluegill) 120 mg/L/24 hr (95% confidence limit: 73-198 mg/L); static
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
An estimated BCF of 5400 was calculated for quinacrine(SRC), using an estimated log Kow of 5.75(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is very high(SRC), provided the compound is not metabolized by the organism(SRC).
12.4 Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc of quinacrine can be estimated to be 4.9X10+6(SRC). According to a classification scheme(2), this estimated Koc value suggests that quinacrine is expected to be immobile in soil. The estimated pKa values for quinacrine are 9.4 and 10.7(3), indicating that this compound will primarily exist in the cation form in the environment and cations generally adsorb more strongly to organic carbon and clay than their neutral counterparts(4).
12.5 Other adverse effects
no data available
13.Disposal considerations
13.1 Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
14.Transport information
14.1 UN Number
ADR/RID: no data available | IMDG: no data available | IATA: no data available |
14.2 UN Proper Shipping Name
ADR/RID: no data available |
IMDG: no data available |
IATA: no data available |
14.3 Transport hazard class(es)
ADR/RID: no data available | IMDG: no data available | IATA: no data available |
14.4 Packing group, if applicable
ADR/RID: no data available | IMDG: no data available | IATA: no data available |
14.5 Environmental hazards
ADR/RID: no | IMDG: no | IATA: no |
14.6 Special precautions for user
no data available
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
no data available
15.Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
Chemical name | Common names and synonyms | CAS number | EC number |
---|---|---|---|
N4-(6-chloro-2-methoxyacridin-9-yl)-N1,N1-diethylpentane-1,4-diamine hydrochloride | N4-(6-chloro-2-methoxyacridin-9-yl)-N1,N1-diethylpentane-1,4-diamine hydrochloride | 130-42-7 | none |
European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
EC Inventory | Listed. | ||
United States Toxic Substances Control Act (TSCA) Inventory | Not Listed. | ||
China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
New Zealand Inventory of Chemicals (NZIoC) | Not Listed. | ||
Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Not Listed. | ||
Vietnam National Chemical Inventory | Not Listed. | ||
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Not Listed. |
16.Other information
Information on revision
Creation Date | Aug 20, 2017 |
---|---|
Revision Date | Aug 20, 2017 |
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Hangzhou DayangChem Co., Ltd
CHINA
Purity: 98%
Lead Time: 7 Day(s)
Price: -
Molchemical
CHINA
Purity: 96%
Lead Time: 7 Day(s)
Price: -
Chemos GmbH
GERMANY
Purity: 96%
Lead Time: 7 Day(s)
Price: -
Ibookbio
WALES
Purity: 96%
Lead Time: 7 Day(s)
Price: -